How can children's room decoration give them a gre

  • Detail

Environmental protection materials should be selected for the building materials of children's rooms. However, green materials are not used, which is equivalent to green decoration. You know, the processing, construction and application of decoration materials, as well as temperature and humidity, will affect the release of harmful substances. Wuhan home decoration network Xiaobian tells you what to pay attention to when decorating children's rooms

I. choose green building materials and try to use natural materials, such as wooden materials, in the decoration of the children's room. However, try to prevent the use of natural stones, which have radioactive damage. In addition, it is better to select the materials with less harmful substances and less release, that is, the decoration materials that conform to the ten specifications of the national "quantitative determination of harmful substances in interior decoration materials". Materials beyond this specification are not necessary, especially for some paints, artificial boards, materials and rubber products. 2、 Through the construction and processing process, the shape of the decoration materials for green construction has been completely changed, and the release amount of harmful substances in the decoration materials must also be changed. What really affects the release amount of harmful substances is the processing and compounding process of the materials. For example, after making a door, using a large core board and a plywood that conform to the national specifications, and forming the door through processing, manufacturing and painting three times, the release of harmful substances must be very different from that before processing. It is this combined situation that really affects the air quality goal. Therefore, it is necessary to select decoration materials with less processing procedures

III. children's room environment has goals according to relevant national regulations, the indoor environment in children's room has goals: carbon dioxide should be less than 0.1%; Carbon monoxide is less than 5 mg per cubic meter, and the temperature is controlled above 18 ℃ in winter and below 28 ℃ in summer; The humidity should be between 30% and 70%; The noise is about less than 50 dB... Some other indoor environmental goals are: the quantitative value of formaldehyde release in the artificial board used in the decoration project is about less than 1.5mg/l; The concentration of radon per cubic meter of air in buildings is 200 baker; The specification for the maximum allowable concentration of harmful substances in the atmosphere of residential areas is that the control concentration of ammonia per cubic meter of air is no more than 0.2 mg... After the decoration of the children's room, it is best to ask the relevant testing department to come home and have a test

IV. prevention and management of indoor air pollution before the decoration of the children's room, parents probably look for the relevant indoor air detection part to make a "pre evaluation", that is, let the environmental protection Professor explain whether the data and technology used in the design scheme can have any impact on the microclimate of the children's room. It is understood that the indoor microclimate conditions include the following aspects: temperature, humidity, relative humidity, wind speed, air pressure, etc. After the decoration of the children's room, pay attention to ventilation. According to the test of indoor environment Professor, the frequency of indoor air replacement directly affects the content of harmful substances in indoor air. The more frequent indoor ventilation or the use of air filters, displacers, etc., the less harmful substances in the air will be, or even non-existent




Copyright © 2011 JIN SHI