Four steps of blank room inspection, attention to

2022-07-22
  • Detail

There is a certain order in the inspection steps of the blank room. It's good for you to inspect the room according to these orders. Now let's understand the inspection steps of the blank room

I. wall material: red brick, light brick, cinder brick, hollow brick, or precast slab. Wall: pay attention to whether the wall has a plastering layer, whether the plastering layer has hollowing, cracks, peeling, mottled, and the internal and external corners are roughly square. It is normal for the flatness of the wall to be between 3 mm and 5 mm. Close the doors and windows to see the large surface, open the doors and windows to see the small surface, and measure whether the top ground is square with a meter ruler

II. Whether the doors and windows

switch is flexible, whether the sealing is tight, whether there is warpage, deformation, lax closing and other phenomena. All glasses should be checked one by one for damage, slag collapse, fragmentation, lax sealing and other phenomena, and the sealing strip, dust strip, waterproof strip must not be missing

III. water supply

mainly check whether the kitchen and bathroom, the main pipe and sub pipe water rooms are set, and whether the household main control valves, water meters and taps are complete

IV. ground waterproof

the floors of indoor kitchens, bathrooms and balconies should be waterproof, and the property must be subject to a closed water test during house inspection

these contents introduce the steps of blank room inspection. You should know more about them, but what details should you pay attention to? Come and have a look

1. Doors, windows, doors are the most easily forgotten places. The owner is happy to open the door with the key. What he cares most is to see what the house looks like, and the appearance and other issues of the door are forgotten. Such a process is absolutely undesirable

2. In the acceptance of the blank room, the wall and ground are the most critical places with the largest area. We should check whether the walls and floors of all rooms are flat, and whether there are hollows on the walls of kitchens and bathrooms

3. When checking and accepting the house, we should check whether there is electricity in every room, and install simple bulbs in every room to see whether they are normal

4. Water, there are good water pipelines in the bathroom and kitchen of the rough room, but most of them have no faucets

南宁男科医院

深圳不孕不育医院

沈阳男科医院

贵阳精神医院

Copyright © 2011 JIN SHI